Admixtures

Mortar Stain Remover

Mortar Stain Remover is a highly concentrated fast acting acid based formula (18% strength) which dissolves mortar and cement stains, ingrained dirt and most paints on mineral surfaces such as brick, render and concrete. Clean up after use with cold water.

PVA Bond

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture. Fully conforms to BS 5270.

Mortar Mix

Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars. Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set. To BS 4887.

Brick & Patio Cleaner

Brick & Patio Cleaner is a fast acting acid based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, paving flags and earthenware.

Evermix 3 in 1

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application. Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.To BS 4887 (initial air).

Integral Liquid Waterproofer

Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. Reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. To BS 4887 (initial air).

Concrete Hardener & Dustproofer

Concrete Hardener & Dustproofer Concrete Hardener & Dustproofer is formulated from high quality silicate resins to both harden and dustproof new and old concrete floors for both internal and external use. It reacts chemically with the lime content of concrete to form a hard-wearing surface.

Accelerator & Frostproofer

Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

406 Stabilising Solution

Microscopically fine polymer emulsion which penetrates dusty/chalky and badly weathered surfaces to leave a stable sound base for decoration with paint, wallpaper, tiling etc. Suitable for both interior and exterior use.